R2063 Low Angle Pocket Cutter
7,790.00 7,790.00 7790.0 USD

Standard Features:
- Low angle
- PLC controlled cycle
- Foot pedal operated
- Adjustable Material Stops
- Up to 2" thick material
- Cycle Time: 1.75 - 2 Sec
- Tooling Included

Technical Data and Specifications:
- Router Bit: 3/8” Solid Carbide, Rough Mill
- Drill Bit: 9/64” Brad and Spur TiN-Coated Bit
- Router: 24,000 RPM, 8 A, 2 HP
- Drill: 22,000 RPM, 0.9 HP, 5.5 CFM (Intermittent)
- Electrical: 230V, 3P, 15A
- Air: 5.5 CFM at 80 - 100 PSI
- Work height: 36"
- Footprint: 27.75" x 20.5"
- Table Area: 15.75" x 23.75"
- Dust Port: 4"

- Shipping Weight: 370 LBS
- Shipping Dimensions: 43" x 41" x 56"H
R2061 Low Angle Pocket Cutter
5,190.00 5,190.00 5190.0 USD

Standard Features:
- 6° Low angle
- PLC controlled cycle
- Foot pedal operated
- Adjustable Material Stops
- Up to 2" thick material
- Cycle Time: 1.75 - 2 Sec
- Tooling Included

Technical Data and Specifications:
- Router Bit: 3/8” Solid Carbide, Rough Mill
- Drill Bit: 9/64” Brad and Spur TiN-Coated Bit
- Router: 24,500 RPM, 11 A, 1.75 HP
- Drill: 31,000 RPM, 4.5 A, 7/8 HP
- Electrical: 110V 15A
- Air: 2 CFM at 80 - 100 PSI
- Work height: 36"
- Footprint: 27.75" x 20.5"
- Table Area: 15.75" x 23.75"
- Dust Port: 4"

- Shipping Weight: 350 LBS
- Shipping Dimensions: 45" x 32" x 56
PR 257 Pinch Roller 62" Capacity w/ Solid Bottom Roller
10,490.00 10,490.00 10490.0 USD

Standard Features:
- 62" Capacity Pinch Roller For Flat Panel Laminating
- Solid Top and Bottom Rollers
- Safety Gates on In-Feed and Out-Feed
- Adjustable Pressure from 50-100 PSI
- Forward and Reverse Feed Directions
- Spacers Provided for Desired Thickness:
(2) 1/8", (2) 1/4", (2) 1/2", (2) 3/4"

Technical Data and Specifications:
- Maximum Width: 62"
- Maximum Thickness: 2"
- Roll Diameter: 5.25"
- Pass Line Height: 30.5"
- Drive Motor: 0.5 HP
- Feed Rate: 50 FPM

- Electrical: 110V, 1Ø, 60Hz, 8A
- Air: 100 PSI

Shipping Dimensions 85" L X 33" W X 57" H
Shipping Weight: 766 LBS

Available Options:
- [0257-2] Variable Speed (0-50 FPM)
- [0257-1] Riser
- [S845] Caster Kit
- [0206.14] 1" Spacer