R2061 - Low Angle Pocket Cutter
4,640.00 4,640.00 4640.0 USD

Standard Features:
- 6° Low angle
- PLC controlled cycle
- Foot pedal operated
- Adjustable Material Stops
- Up to 2" thick material
- Cycle Time: 1.75 - 2 Sec
- Tooling Included

Technical Data and Specifications:
- Router Bit: 3/8” Solid Carbide, Rough Mill
- Drill Bit: 9/64” Brad and Spur TiN-Coated Bit
- Router: 24,500 RPM, 11 A, 1.75 HP
- Drill: 31,000 RPM, 4.5 A, 7/8 HP
- Electrical: 110V 15A
- Air: 2 CFM at 80 - 100 PSI
- Work height: 36"
- Footprint: 27.75" x 20.5"
- Table Area: 15.75" x 23.75"
- Dust Port: 4"

- Shipping Weight: 350 LBS
- Shipping Dimensions: 45" x 32" x 56
Pinch Roller 62" Capacity w/ Solid Bottom Roller
9,490.00 9,490.00 9490.0 USD

Standard Features:
- 62" Capacity Pinch Roller For Flat Panel Laminating
- Solid Top and Bottom Rollers
- Safety Gates on In-Feed and Out-Feed
- Adjustable Pressure from 50-100 PSI
- Forward and Reverse Feed Directions
- Spacers Provided for Desired Thickness: (2) 1/8", (2) 1/4", (2) 1/2", (2) 3/4"

Technical Data and Specifications:
- Maximum Width: 62"
- Maximum Thickness: 2"

- Pass Line Height: 30.5"
- Drive Motor: 0.5 HP
- Feed Rate: 50 FPM

- Electrical: 110V, 1Ø, 60Hz, 8A
- Air: 100 PSI

Shipping Dimensions 85" L X 33" W X 57" H
Shipping Weight: 766 LBS

Available Options:
- Variable Speed (0-50 FPM)
- Riser
Rubber Pad, 1.25"
3.00 3.00 3.0 USD
3/8" Counterbore Bit w/ 0.136 Pilot bit
40.00 40.00 40.0 USD
Carbide Tipped 3/8" Spiral Face Frame Counterbore Bit w/ 0.136 Pilot bit