1/4" NPT to 5/16" Tube, Male Straight
3.45 3.45 3.45 USD
[A38] 1/4" NPT X 5/16" Push to connect tube, Male straight.
13 Spindle Manual Single Row Line Drill
4,890.00 4,890.00 4890.0 USD

Standard Features:
- (1) 13-Vertical Gear Driven Spindles on 32mm Centers
- 10mm Bored Collets with set screws
- (7) Right Hand, (6) Left Hand
- 60" Back Fence With (4) Stops
- (2) Spring Loaded Index Pins
- Adjustable boring depth
- Manually Actuated Boring Cycle
- Spring Return Up Stroke
- (2) Spring Operated Hold Downs
- Manual Motor Control
- Tooling Not Included

Technical Data and Specifications
- Spindle Drive Motor: 0.75 HP
- Throat Depth: 8"
- Work Surface: 20" x 48"
- Footprint: 30" x 60"
- Electrical: 120V, 1 Phase, 60 Hz
- Air: N/A

- Shipping Dimensions: 42" X 64" X 76"
- Shipping Weight: 508 LBS
Clamp Foot 1.25" w/ Rubber Pad
32.50 32.50 32.5 USD
[U200A1014] Clamp foot w/1.25" dia. rubber pad and set screw.
Foot Pedal, 2 position, momentary, 1/4" ports
102.00 102.00 102.0 USD
Foot Pedal, 5-port (4-way), 2-position, non-locking (Momentary), 1/4 inch female NPT inlet(s)/outlet(s)
PR 257 Pinch Roller 62" Capacity w/ Solid Bottom Roller
9,990.00 9,990.00 9990.0 USD

Standard Features:
- 62" Capacity Pinch Roller For Flat Panel Laminating
- Solid Top and Bottom Rollers
- Safety Gates on In-Feed and Out-Feed
- Adjustable Pressure from 50-100 PSI
- Forward and Reverse Feed Directions
- Spacers Provided for Desired Thickness:
(2) 1/8", (2) 1/4", (2) 1/2", (2) 3/4"

Technical Data and Specifications:
- Maximum Width: 62"
- Maximum Thickness: 2"
- Roll Diameter: 5.25"
- Pass Line Height: 30.5"
- Drive Motor: 0.5 HP
- Feed Rate: 50 FPM

- Electrical: 110V, 1Ø, 60Hz, 8A
- Air: 100 PSI

Shipping Dimensions 85" L X 33" W X 57" H
Shipping Weight: 766 LBS

Available Options:
- [0257-2] Variable Speed (0-50 FPM)
- [0257-1] Riser
- [S845] Caster Kit
- [0206.14] 1" Spacer
R200EA Face Frame Assembly Easel - 5' x 12' with 5 Clamps
8,590.00 8,590.00 8590.0 USD

Standard Features:
- 5'x12' Assembly Table
- 45 Degree Vertical Easel
- Hold Down Beam with (5) Adjustable Hold Down Cylinders
- Squaring Bars on Left, Right and Bottom Sides
- 1" Thick Laminated Surfaced Table
- Heavy Duty Steel Frame
- (1) Coilhose for Pneumatic Screw Gun
- Screw Gun Not Included
- Usable Table Area: 58.5" x 141"
- Footprint: 165" L x 48" D

- Electrical: N/A
- Air: 100 PSI

- Shipping Dimensions: 68" X 169" X 30" H
- Shipping Weight: 1250 LBS
R200T Single Spindle Counterbore Tub
6,590.00 6,590.00 6590.0 USD
[R200T]
Standard Features:
- 1.5 HP Spindle Drive Motor, TEFC
- Foot Actuated Boring Cycle
- 14 Degree Single Spindle
- 6,100 RPM Spindle Speed
- 24" x 30" Table Area
- Adjustable Fence with (2) Stops
- Tooling Included
- Interchangeable Head with R220T

- Electrical: 110/120V, 60Hz, 20A
- Air: 80-100 PSI
- Work Height: 38.25"
- Footprint: 34.5" x 25.25"

Shipping Dimensions: 33” X 43” X 51”
Shipping Weight: 561 LBS
R2061 Low Angle Pocket Cutter
4,890.00 4,890.00 4890.0 USD

Standard Features:
- 6° Low angle
- PLC controlled cycle
- Foot pedal operated
- Adjustable Material Stops
- Up to 2" thick material
- Cycle Time: 1.75 - 2 Sec
- Tooling Included

Technical Data and Specifications:
- Router Bit: 3/8” Solid Carbide, Rough Mill
- Drill Bit: 9/64” Brad and Spur TiN-Coated Bit
- Router: 24,500 RPM, 11 A, 1.75 HP
- Drill: 31,000 RPM, 4.5 A, 7/8 HP
- Electrical: 110V 15A
- Air: 2 CFM at 80 - 100 PSI
- Work height: 36"
- Footprint: 27.75" x 20.5"
- Table Area: 15.75" x 23.75"
- Dust Port: 4"

- Shipping Weight: 350 LBS
- Shipping Dimensions: 45" x 32" x 56
R2063 Low Angle Pocket Cutter
7,390.00 7,390.00 7390.0 USD

Standard Features:
- Low angle
- PLC controlled cycle
- Foot pedal operated
- Adjustable Material Stops
- Up to 2" thick material
- Cycle Time: 1.75 - 2 Sec
- Tooling Included

Technical Data and Specifications:
- Router Bit: 3/8” Solid Carbide, Rough Mill
- Drill Bit: 9/64” Brad and Spur TiN-Coated Bit
- Router: 24,000 RPM, 8 A, 2 HP
- Drill: 22,000 RPM, 0.9 HP, 5.5 CFM (Intermittent)
- Electrical: 230V, 3P, 15A
- Air: 5.5 CFM at 80 - 100 PSI
- Work height: 36"
- Footprint: 27.75" x 20.5"
- Table Area: 15.75" x 23.75"
- Dust Port: 4"

- Shipping Weight: 370 LBS
- Shipping Dimensions: 43" x 41" x 56"H
R210EA Open Back Face Frame Assembly Easel - 5' x 12' with 5 Clamps
9,790.00 9,790.00 9790.0 USD

Standard Features:
- 5'x12' Assembly Table
- Open Back For 60" Plus Frame Height
- 45 Degree Vertical Easel
- Squaring Bars on Right, Left, and Bottom Sides
- 1" Thick Formica Surfaced Table
- Heavy Duty Steel Frame
- Hold Down Beam with (5) Adjustable Hold Down Cylinders
- (1) Coilhose for Pneumatic Screw Gun
- Screw Gun Not Included
- Usable Table Area: 58.5" x 141"
- Footprint: 165" L x 48" D

- Electrical: N/A
- Air: 100 PSI

- Shipping Dimensions: 68" X 169" X 30" H
- Shipping Weight: 1300 LBS
R215EA Face Frame Assembly Easel - 5' x 8' with 3 Clamps
6,990.00 6,990.00 6990.0 USD

Standard Features:
- 5'x8' Assembly Table
- 45 Degree Vertical Easel
- Squaring Bars on Left and Bottom Sides
- 1" Thick Formica Surfaced Table
- Heavy Duty Steel Frame
- Hold Down Beam with (3) Adjustable Hold Down Cylinders
- (1) Coilhose for Pneumatic Screw Gun
- Screw Gun Not Included
- Usable Table Area: 58.5" x 94.5"
- Footprint: 117" L x 48" D

- Shipping Dimensions: 120" L x 68" W x 30" H
- Shipping Weight: 1200 LBS
R250EA Framemaster Face Frame & Door Assembly System - 6' x 12'
15,290.00 15,290.00 15290.0 USD

Standard Features:
- 6'x12', 45° Vertical Assembly Table
- (10) Universal Clamp Cylinders & Manifold
- Clamp Arm with (5) Hold Down Cylinders
- (3) Squaring Bars on Left, Right and Bottom Sides
- Steel Table with 2" Cylinder Position Grid Pattern
- 3" Bore Clamp Cylinder Housing (706.8 LBS of force at 100 PSI)
- 10 Port Manifold with 1/4" NPT Regulator/Gage
- Adjustable pressure from 20 to 130 PSI
- Foot Treadle
- (1) Coilhose for Pneumatic Screw Gun
- Screw Gun Not Included
- 1-5/16" Clearance Under Vertical Cylinders
- Open Back Design
- (4) Material Hold Down Dogs
- (3) Adjustable Material Positioning Stops
- Usable Table Area:
- Footprint: 66" D x 165" L x 86" H

Shipping Dimensions: 170" L X 84" W X 28" H
Shipping Weight: 1770 LBS
Rubber Pad, 1.25"
3.00 3.00 3.0 USD
[H191] 1.25" Dia. rubber replacement pad for clamp foot , adhesive backed.